Infineon IRS2092STRPBF-EL

Supplier Package

SOIC N

Minimum Operating Supply Voltage

10 V

Maximum Rise Time

50 ns

Peak Output Current

1.2 A

Driver Type

High and Low Side

Maximum Fall Time

35 ns

Maximum Operating Supply Voltage

18 V

Bridge Type

Half Bridge

Maximum Turn-Off Delay Time

335 ns

Driver Configuration

Inverting/Non-Inverting

Mounting

Surface Mount

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40 to 125 °C

Pin Count

a count of all of the component leads (or pins)

16

Number of Outputs

2

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

800 kHz

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

5.1 V

Number of Drivers

2