Infineon ICE3B0365JG

Lifecycle Status

Obsolete (Last Updated: 2 years ago)

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

12-BSOP (0.295, 7.50mm Width) Exposed Pad

Number of Pins

16

Supplier Device Package

PG-DSO-12

Package Quantity

2500

Breakdown Voltage / V

650 V

SwitchingFrequency

74.5 kHz

On/Off Pin

No

Number of PWM Outputs

1

Supplier Package

DSO

Adjustable Output

No

Mounting

Surface Mount

RoHS

Compliant

Package

Bulk

Mfr

Infineon Technologies

Product Status

Active

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25 to 130 °C

Series

CoolMOS™

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

130 °C

Min Operating Temperature

-25 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

22 W

Pin Count

a count of all of the component leads (or pins)

12

Number of Outputs

1

Output Voltage

650 V

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5 V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

26 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3.6 mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

300 mA

Voltage - Supply (Vcc/Vdd)

10.3V ~ 26V

Control Features

Soft Start

Topology

Flyback

Frequency - Switching

67kHz

Halogen Free

Halogen Free

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

30 ns

Drain to Source Voltage (Vdss)

650 V

Fall Time (Typ)

30 ns

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

650 V

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Over Temperature, Over Voltage

Max Duty Cycle

80 %

Duty Cycle

the percentage of the ratio of pulse duration, or pulse width (PW) to the total period (T) of the waveform.

75 %

Output Isolation

Isolated

Voltage - Breakdown

650V

On-State Resistance

7.5 Ω

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Contains Lead