CIC61508OSRF5VAAAXUMA1

Infineon CIC61508OSRF5VAAAXUMA1

Part No:

CIC61508OSRF5VAAAXUMA1

Manufacturer:

Infineon

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39140477-CIC61508OSRF5VAAAXUMA1

Description:

Companion Safety Monitor Chip 38-Pin TSSOP

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Supplier Package
    TSSOP
  • Typical Operating Supply Voltage
    4.5000 V
  • Minimum Operating Supply Voltage
    4.5 V
  • Category
    Companion Safety Monitor Chip
  • Maximum Operating Supply Voltage
    5.5 V
  • Mounting
    Surface Mount
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 70°C
  • Series
    SXT214
  • Size / Dimension
    0.079 L x 0.063 W (2.00mm x 1.60mm)
  • Type
    MHz Crystal
  • Frequency
    18.432 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±20ppm
  • Pin Count

    a count of all of the component leads (or pins)

    38
  • ESR (Equivalent Series Resistance)
    200 Ohms
  • Operating Supply Current
    22.6 mA
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±15ppm
  • Power Supply Type

    There are three major kinds of power supplies: unregulated (also called brute force), linear regulated, and switching. The fourth type of power supply circuit called the ripple-regulated, is a hybrid between the “brute force” and “switching” designs, and merits a subsection to itself.

    Digital
  • Height Seated (Max)
    0.020 (0.50mm)
  • Ratings
    -
0 Similar Products Remaining