Idec SA1E-DP1

Mount

Cable

Mounting Type

Flange Mount

Housing Material

PBT, PC

Manufacturer Part Number

SA1E-DP1

Approvals

CE

Manufacturer

IDEC

Dim

(W x H x D) 10.8 x 32.7 x 19.5 mm

Connections

Cable 1 m

Min. temperature

-25°C

Range

0.7m

Content

1pc(s)

Min. operating voltage

10V DC

Max. temperature

+55°C

Connector

Cable, open end

Max. range

0.7m

Max. operating voltage

30V DC

Outputs

PNP

RoHS

Compliant

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+55°C

Minimum Operating Temperature

-25°C

Standards Met

CE Certified, cULus Listed

Factory Pack QuantityFactory Pack Quantity

1

Brand

IDEC

Series

SA1E

Termination

Cable

Type

SA1E-DP1

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

55 °C

Min Operating Temperature

-25 °C

Subcategory

Sensors

Depth

19.5mm

Output

PNP, 30 V/DC, <Max/> voltage:100mA

Function

Light-ON

Output Type

PNP

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Light On

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100 mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1 ms

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1 ms

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Photoelectric Sensors

Sensing Method

Diffuse Reflective

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Cable

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

Infrared

Connection Type

Cable

Product Category

a particular group of related products.

Photoelectric Sensors

Power Type

DC

Electrical Connection

Cable 1 m

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67

Width

10.8mm

Height

32.7mm

Ratings

IP67