Idec PS5R-A05

Mount

DIN Rail, Panel

Manufacturer Part Number

PS5R-A05

Approvals

CE, cULus, TUV, UL508

Input Frequency

The Input Frequency refers to the frequency that mobiles and portables transmit on to access a Repeater.

47-63 Hz

Manufacturer

IDEC

RoHS

No

Power Factor Correction

No

Mounting

DIN Rail, Panel

Voltage-Output 1

5 V

Voltage Rating (DC)

340 V

Voltage Rating (AC)

240 V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

14-140 °F

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

60 °C

Min Operating Temperature

-10 °C

Power Rating

7.5 W

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1.5 A

Frequency

833 MHz

Number of Outputs

1

Output Voltage

5 V

Max Output Current

The maximum current that can be supplied to the load.

1.5 A

Max Voltage Rating (AC)

264 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.5 A

Output Power

That power available at a specified output of a device under specified conditions of operation.

7.5 W

Min Input Voltage

85 V

Max Input Voltage

264 V

Current - Output 1

1.5 A

Max Output Power

The maximum output power = the maximum output current × the rated output voltage

7.5 W

Nominal Output Voltage

5 V

Power

7.5 W

Overload Protection

Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

Yes

Min Input Voltage (AC)

85 V

Nominal Input Voltage (AC)

120 VAC, 208 VAC, 240 VAC

Width

44.958 mm

Height

74.93 mm

Length

70 mm

REACH SVHC

No SVHC