Hosonic E2SB27E0X0000E

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Mfr

Hosonic Electronic Co., Ltd

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 70°C

Series

E2SB

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

5.0000 ppm/°C

Type

MHz Crystal

Resistance

1 kOhm

Power Rating

0.125 W

Resistor Type

High Precision

Frequency

27.12 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±10ppm

ESR (Equivalent Series Resistance)

50 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±10ppm

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

0.1

Product Length

7.62

Height Seated (Max)

0.026 (0.65mm)

Ratings

-