Honeywell Sensing and Productivity Solutions CSNF161

Factory Lead Time

23 Weeks

Mount

PCB

Mounting Type

Through Hole

Package / Case

Module, Single Pass Through

Number of Pins

3

Housing Material

PBT

CoilResistance

30Ohm

Current Sensing

Current sensing refers to the generation of the voltage signal which is related to the current passing in the circuit.

150A

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Series

CSN

Published

1998

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Solder

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Voltage - Supply

±12V~15V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

150A

Frequency

150kHz

Output

Ratiometric, Current

Current - Supply (Max)

10mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15V

Polarity

Bidirectional

Number of Channels

1

Polarization

Bidirectional

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100mA

Max Supply Current

10mA

Accuracy

±0.5%

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

0.5μs

Sensor Type

Hall Effect, Closed Loop

Max Frequency

150kHz

Linearity

0.1 %

Sensing Method

Hall Effect

Max Supply Voltage (DC)

15V

Min Supply Voltage (DC)

12V

For Measuring

AC/DC

Width

36.5mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant