Hittite HMC1063LP3ETR

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Supplier Device Package

16-QFN (3x3)

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 70°C

Series

SXT114

Size / Dimension

0.063 L x 0.047 W (1.60mm x 1.20mm)

Type

MHz Crystal

Voltage - Supply

-

Frequency

26 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

ESR (Equivalent Series Resistance)

150 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±15ppm

Current - Supply

-

Gain

-

RF Type

The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.

General Purpose

Secondary Attributes

Up Converter

Noise Figure

Noise figure (NF) and noise factor (F) are measures of degradation of the signal-to-noise ratio (SNR), caused by components in a signal chain.

-

Number of Mixers

a device that combines two or more electrical or electronic signals into one or two composite output signals. There are two basic circuits that both use the term mixer, but they are very different types of circuits: additive mixers and multiplicative mixers. Additive mixers are also known as analog adders to distinguish from the related digital adder circuits.

2

Height Seated (Max)

0.018 (0.45mm)