HITACHI HD74HC595P

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Terminals

16

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Package Description

DIP, DIP16,.3

Package Style

IN-LINE

Package Body Material

PLASTIC/EPOXY

Package Equivalence Code

DIP16,.3

Operating Temperature-Min

-40 °C

Operating Temperature-Max

85 °C

Rohs Code

Yes

Manufacturer Part Number

HD74HC595P

Supply Voltage-Nom (Vsup)

4.5 V

Package Code

DIP

Package Shape

RECTANGULAR

Manufacturer

Hitachi Ltd

Part Life Cycle Code

Transferred

Ihs Manufacturer

HITACHI LTD

Max

21000000 Hz

Risk Rank

5.49

Part Package Code

DIP

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT214

Size / Dimension

0.079 L x 0.063 W (2.00mm x 1.60mm)

Type

MHz Crystal

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8542.39.00.01

Subcategory

Shift Registers

Technology

CMOS

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

THROUGH-HOLE

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

2.54 mm

Reach Compliance Code

unknown

Frequency

48 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

Pin Count

a count of all of the component leads (or pins)

16

JESD-30 Code

R-PDIP-T16

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

ESR (Equivalent Series Resistance)

60 Ohms

Supply Voltage-Max (Vsup)

6 V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/6 V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Supply Voltage-Min (Vsup)

2 V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Number of Bits

8

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±15ppm

Family

HC/UH

Output Characteristics

3-STATE

Seated Height-Max

5.06 mm

Output Polarity

TRUE

Logic IC Type

SERIAL IN PARALLEL OUT

Trigger Type

POSITIVE EDGE

Propagation Delay (tpd)

190 ns

Count Direction

RIGHT

Height Seated (Max)

0.020 (0.50mm)

Width

7.62 mm

Length

19.2 mm