HARTING 9300060543

Mounting Type

Surface Mount

Package / Case

0606, Concave

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

-

Number of Pins

4

Supplier Device Package

0606

Housing Material

Aluminum

Package

Tape & Reel (TR)

Mfr

CTS Resistor Products

Product Status

Active

Cable Entry Angle

Side

Insert / Contact Gender

-

Voltage, Rating

-

Wire Gauge Min

-

Contact Materials

-

Wire Gauge Max

-

Boardlocks

-

Housing / Hood Size

6B

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Series

S4x

Size / Dimension

0.063 L x 0.063 W (1.60mm x 1.60mm)

Tolerance

±1%

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Number of Positions

-

Applications

DDR SDRAM, DRAM, MDDR

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

-

Termination Style

-

Accessory Type

-

Number of Resistors

2

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

63mW

Thread Size

given in nominal sizes, not in the actual measurement.

PG29

Resistor-Ratio-Drift

-

Resistance (Ohms)

560k

Resistor Matching Ratio

The resistor matching is done for better resistor poly arrangement and spacing(it is process dependent ),but the sheilding is used to protect critical nets from crossing noisy signals.

-

Product

Hood

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP65, IP66, IP67

Height Seated (Max)

0.022 (0.55mm)