HI3-0306-5

HARRIS HI3-0306-5

Part No:

HI3-0306-5

Manufacturer:

HARRIS

Datasheet:

-

Package:

Radial

AINNX NO:

46111716-HI3-0306-5

Description:

DUAL DPST CMOS ANALOG SWITCH

Products specifications
  • Package / Case
    Radial
  • Mounting Type
    Through Hole
  • Supplier Device Package
    -
  • Package
    Bulk
  • Mfr
    Vishay Foil Resistors (Division of Vishay Precision Group)
  • Product Status
    Active
  • Channel-to-Channel Matching (ΔRon)
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 125°C
  • Series
    VHP101
  • Size / Dimension
    0.415 L x 0.162 W (10.54mm x 4.11mm)
  • Tolerance
    ±0.01%
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    0.0ppm/°C
  • Resistance
    2.3258 kOhms
  • Composition
    Metal Foil
  • Power (Watts)
    0.3W
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    -
  • Number of Circuits
    2
  • -3db Bandwidth
    -
  • On-State Resistance (Max)
    50Ohm
  • Multiplexer/Demultiplexer Circuit
    1:1
  • Current - Leakage (IS(off)) (Max)
    5nA
  • Channel Capacitance (CS(off), CD(off))
    16pF, 14pF
  • Switch Circuit

    establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

    SPST
  • Switch Time (Ton, Toff) (Max)
    250ns, 150ns
  • Charge Injection

    A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

    30pC
  • Crosstalk
    -
  • Voltage - Supply, Single (V+)
    44V
  • Voltage - Supply, Dual (V±)
    ±22V
  • Features
    Moisture Resistant, Non-Inductive
  • Height Seated (Max)
    0.450 (11.43mm)
0 Similar Products Remaining