Hamlin HEAQW210

Mount

Through Hole

Number of Pins

8

RoHS

Compliant

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

1.5 ms

Termination

PCB

Resistance

30 Ω

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-30 °C

Lead Pitch

2.54 mm

Output Voltage

350 V

Row Spacing

the space needed between rows to allow room for people or farm equipment to get through.

7.62 mm

Leakage Current

1 µA

Throw Configuration

DPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1 ms

Forward Current

Current which flows upon application of forward voltage.

5 mA

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.5 V

RMS Current (Irms)

130 mA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

130 mA

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

3.75 kV

Outside Diameter

The outer diameter (OD) of a hollow circular pipe is the measurement of the outside edges of the pipe passing through its center.

6.5 mm

Width

9.68 mm

REACH SVHC

No SVHC