891-001-69PA2-0B7-18J

Glenair 891-001-69PA2-0B7-18J

Part No:

891-001-69PA2-0B7-18J

Manufacturer:

Glenair

Datasheet:

-

Package:

0805 (2012 Metric)

AINNX NO:

39139786-891-001-69PA2-0B7-18J

Description:

Cable Assembly PTFE 0.4572m 30AWG 69POS Nanominiature Connector PL

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    0805 (2012 Metric)
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Gold
  • Package
    Bulk
  • Mfr
    Abracon LLC
  • Product Status
    Obsolete
  • Resistance - Channel (Ohms)
    800
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    16V
  • Termination Method
    Crimp
  • Wire Size
    30 AWG
  • Cable Types
    PTFE
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    AEMIF-0805
  • Size / Dimension
    0.079 L x 0.047 W (2.00mm x 1.20mm)
  • Connector Type
    69POS Nanominiature Connector
  • Type
    Low Pass
  • Color
    Blue
  • Applications
    Data Lines for Mobile Devices
  • Gender
    Plug
  • Technology
    RC (Pi)
  • Number of Channels
    1
  • Current
    300 mA
  • Cable Length

    A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

    0.4572 m
  • ESD Protection
    No
  • Attenuation Value

    Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

    20dB @ 800MHz ~ 2GHz
  • Filter Order

    The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

    2nd
  • Values
    R = 800mOhms
  • Center / Cutoff Frequency
    400MHz (Cutoff)
  • Height
    0.039 (1.00mm)
0 Similar Products Remaining