FQ7050B-7.3728

Fox Electronics FQ7050B-7.3728

Part No:

FQ7050B-7.3728

Manufacturer:

Fox Electronics

Package:

SMD/SMT

ROHS:

AINNX NO:

12698892-FQ7050B-7.3728

Category:

Crystals

Description:

CRYSTAL 7.3728MHZ 20PF SMD

Products specifications
  • Mount
    Surface Mount
  • Package / Case
    SMD/SMT
  • Number of Pins
    4
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Cut Tape
  • Tolerance
    0.003%
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Terminal Finish
    Gold (Au)
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    70°C
  • Min Operating Temperature
    0°C
  • Additional Feature

    Any Feature, including a modified Existing Feature, that is not an Existing Feature.

    TAPE AND REEL
  • Depth
    5mm
  • Frequency
    7.3728MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    30 ppm
  • Physical Dimension
    L7.0XB5.0XH1.3 (mm)/L0.276XB0.197XH0.051 (inch)
  • Operating Frequency

    Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

    7.3728MHz
  • ESR (Equivalent Series Resistance)
    80Ohm
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    20pF
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    0.003%
  • Drive Level
    500 µW
  • Crystal/Resonator Type
    PARALLEL - FUNDAMENTAL
  • Series Resistance
    80Ohm
  • Height
    1.3mm
  • Length
    7mm
  • Width
    5mm
  • REACH SVHC
    No SVHC
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining