Flex Power BMR4570100/002

Package / Case

4-SMD, No Lead

Mounting Type

Surface Mount

Package

Bulk

Product Status

Active

Mfr

Suntsu Electronics, Inc.

Supplier Package

Eighth-Brick

Switching Regulator

Yes

Mounting

Through Hole

Output Voltage-Channel 1

12 V

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 125 C

Minimum Operating Temperature

- 40 C

Mounting Styles

Through Hole

Input Voltage-Max

60 V

Input Voltage-Min

40 V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT324

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Type

MHz Crystal

Subcategory

DC-DC Converter

Frequency

40 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

Pin Count

a count of all of the component leads (or pins)

16

Number of Outputs

1

Output Voltage

12 V

ESR (Equivalent Series Resistance)

40 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

19pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

25 A

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±25ppm

Output Power

That power available at a specified output of a device under specified conditions of operation.

300 W

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Isolated DC-DC Converters

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

2.25 kVDC

Product

Isolated

Input Voltage

40 to 60 V

Height Seated (Max)

0.031 (0.80mm)

Width

22.7 mm

Height

10.2 mm

Length

58.4 mm