FLEx 569060

Package / Case

4-SMD, No Lead

Mounting Type

Surface Mount

Product Status

Active

Mfr

SiTime

Package

Strip

Manufacturer Part Number

569060

Approvals

CE, CSA, IEC, UL

Manufacturer

NVENT ERIFLEX, ERICO

Voltage Rating (AC)

600 VAC

RoHS

Yes

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

600 V

Series

SiT1602B

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Size / Dimension

0.197 L x 0.126 W (5.00mm x 3.20mm)

Type

XO (Standard)

Composition

Thermoplastic

Color

Gray

Current Rating (Amps)

335 A

Voltage - Supply

2.25V ~ 3.63V

Frequency

33.33 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

Output

HCMOS, LVCMOS

Function

Standby (Power Down)

Base Resonator

MEMS

Current - Supply (Max)

4.5mA

Number of Poles

1

Spread Spectrum Bandwidth

In telecommunication and radio communication, spread-spectrum techniques are methods by which a signal (e.g., an electrical, electromagnetic, or acoustic signal) generated with a particular bandwidth is deliberately spread in the frequency domain, resulting in a signal with a wider bandwidth.

-

Absolute Pull Range (APR)

-

Load Side Connection Type

Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

Screw Connection

Line Side Connection Type

This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

Screw Connection

Load Side Connections Per Pole

11

Line Side Wire/Stud Size

350MCM (kcmil)

Line Side Connections Per Pole

4

Load Side Wire/Stud Size

#1 - #14

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP20

Height Seated (Max)

0.031 (0.80mm)

Ratings

-