FCI HM2P08PDE1R1N9LF

Factory Lead Time

9 Weeks

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Package Description

LEAD FREE

Contact Finish Mating

NOT SPECIFIED

Rohs Code

Yes

Manufacturer Part Number

HM2P08PDE1R1N9LF

Mounting Styles

STRAIGHT

Number of Rows Loaded

7

Contact Materials

NOT SPECIFIED

Manufacturer

Amphenol FCi

Part Life Cycle Code

Active

Ihs Manufacturer

AMPHENOL FCI ASIA PTE LTD

Risk Rank

5.67

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Connector Type

BOARD CONNECTOR

Type

MHz Crystal

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

50 GROUND SHIELD CONTACTS IN 2 ROWS AVAILABLE

MIL Conformance

NO

DIN Conformance

NO

IEC Conformance

NO

Filter Feature

NO

Mixed Contacts

NO

Option

GENERAL PURPOSE

Total Number of Contacts

175

Terminal Pitch

The center distance from one pole to the next.

2 mm

Reach Compliance Code

compliant

Frequency

20 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

Contact Gender

MALE

UL Flammability Code

94V-0

ESR (Equivalent Series Resistance)

80 Ohms

Termination Type

PRESS FIT

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Height Seated (Max)

0.026 (0.65mm)