FDBS09H04A

Fairchild FDBS09H04A

Part No:

FDBS09H04A

Manufacturer:

Fairchild

Datasheet:

-

Package:

Axial

AINNX NO:

39971832-FDBS09H04A

Description:

IC SMART HI SIDE SWITCH D2PAK-7

Products specifications
  • Package / Case
    Axial
  • Mounting Type
    Surface Mount
  • Supplier Device Package
    Axial
  • Package
    Bulk
  • Base Product Number
    FDBS09
  • Mfr
    Fairchild Semiconductor
  • Product Status
    Obsolete
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -65°C ~ 275°C
  • Series
    CPL
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • Size / Dimension
    1.391 L x 0.375 W (35.32mm x 9.52mm)
  • Tolerance
    ±5%
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±300ppm/°C
  • Resistance
    20 mOhms
  • Composition
    Wirewound
  • Power (Watts)
    7W
  • Number of Outputs
    1
  • Output Type
    N-Channel
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    --
  • Interface
    On/Off
  • Current - Output (Max)
    -
  • Output Configuration
    High Side
  • Voltage - Supply (Vcc/Vdd)
    Not Required
  • Input Type
    Non-Inverting
  • Switch Type

    Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

    General Purpose
  • Ratio - Input:Output
    1:1
  • Voltage - Load
    5.5V ~ 28V
  • Fault Protection

    Protection against electric shock under. single fault conditions.

    Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO
  • Rds On (Typ)
    -
  • Features
    Flame Proof, Pulse Withstanding, Safety
  • Height Seated (Max)
    --
0 Similar Products Remaining