ACE1001EM8

Fairchild ACE1001EM8

Part No:

ACE1001EM8

Manufacturer:

Fairchild

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39499335-ACE1001EM8

Description:

8-BIT, EEPROM, ACE1001 CPU, 1MHZ

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Supplier Device Package
    8-SOIC
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Number of I/Os
    6
  • Base Product Number
    ACE1001
  • Data Converters
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 60°C
  • Series
    SXT224
  • Size / Dimension
    0.098 L x 0.079 W (2.50mm x 2.00mm)
  • Type
    MHz Crystal
  • Frequency
    24 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • ESR (Equivalent Series Resistance)
    80 Ohms
  • Oscillator Type

    Wien Bridge Oscillator; RC Phase Shift Oscillator; Hartley Oscillator; Voltage Controlled Oscillator; Colpitts Oscillator; Clapp Oscillators; Crystal Oscillators; Armstrong Oscillator.

    External, Internal
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Speed
    4MHz
  • RAM Size
    64 x 8
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Voltage - Supply (Vcc/Vdd)
    2.2V ~ 5.5V
  • Core Processor
    ACE1001
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Peripherals
    Brown-out Detect/Reset, LVD, POR, PWM, WDT
  • Program Memory Type

    Program memory typically refers to flash memory when it is used to hold the program (instructions). Program memory may also refer to a hard drive or solid state drive (SSD). Contrast with data memory.

    EEPROM
  • Core Size
    8-Bit
  • Program Memory Size
    1KB (1K x 8)
  • Connectivity
    -
  • EEPROM Size
    64 x 8
  • Height Seated (Max)
    0.026 (0.65mm)
0 Similar Products Remaining