1V5KE91A

Fairchild 1V5KE91A

Part No:

1V5KE91A

Manufacturer:

Fairchild

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

40150336-1V5KE91A

Category:

TVS - Diodes

Description:

TVS DIODE 77.8VWM 125VC DO201AD

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Supplier Device Package
    DO-201AD
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30°C ~ 85°C
  • Series
    SXT114
  • Size / Dimension
    0.063 L x 0.047 W (1.60mm x 1.20mm)
  • Type
    MHz Crystal
  • Applications
    General Purpose
  • Frequency
    27.12 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±25ppm
  • ESR (Equivalent Series Resistance)
    150 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    11pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±25ppm
  • Power Line Protection

    During fault, the only circuit breaker closest to the fault point should be tripped. The operating time of relay associated with protection of line should be as minimum as possible in order to prevent unnecessary tripping of circuit breakers associated with other healthy parts of power system.

    No
  • Voltage - Breakdown (Min)
    86.5V
  • Power - Peak Pulse
    1500W (1.5kW)
  • Current - Peak Pulse (10/1000μs)
    12A
  • Voltage - Clamping (Max) @ Ipp
    125V
  • Voltage - Reverse Standoff (Typ)
    77.8V
  • Unidirectional Channels
    1
  • Capacitance @ Frequency
    -
  • Height Seated (Max)
    0.018 (0.45mm)
0 Similar Products Remaining