TPS UNIVERSAL DEMO KIT

Excelitas Technologies TPS UNIVERSAL DEMO KIT

Part No:

TPS UNIVERSAL DEMO KIT

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39400357-TPS UNIVERSAL DEMO KIT

Description:

DEMO KIT DIGIPILE SENSORS TO USB

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Lead Free Status / RoHS Status
    --
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 70°C
  • Series
    SXT324
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    --
  • Type
    MHz Crystal
  • Voltage - Supply
    --
  • Frequency
    11.0592 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • ESR (Equivalent Series Resistance)
    250 Ohms
  • Interface
    --
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    13pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±25ppm
  • Utilized IC / Part
    DigiPile™
  • Supplied Contents
    Board(s)
  • Sensor Type
    Temperature
  • Sensitivity
    --
  • Embedded
    --
  • Sensing Range

    The sensing range of position sensors is the displacement between the sensing face of the sensor and the approaching measurement object that triggers a signal change in the sensor.

    --
  • Height Seated (Max)
    0.031 (0.80mm)
  • Ratings
    -
0 Similar Products Remaining