24.000MHZ HC49/4H/30/50/-40 85/18PF/ATF

Euroquartz 24.000MHZ HC49/4H/30/50/-40 85/18PF/ATF

Part No:

24.000MHZ HC49/4H/30/50/-40 85/18PF/ATF

Manufacturer:

Euroquartz

Datasheet:

-

Package:

-

AINNX NO:

68593713-24.000MHZ HC49/4H/30/50/-40 85/18PF/ATF

Category:

Crystals

Description:

Euroquartz 24MHz Crystal ±30ppm HC-49-4H 2-Pin 10.77 x 4.34 x 3.5mm

Products specifications
  • Mounting Type
    Through Hole
  • Voltage, Rating
    100 V
  • Dimensions
    10.77 x 4.34 x 3.5mm
  • Standard Frequency
    24MHz
  • Package Type
    HC-49-4H
  • Maximum Operating Temperature

    the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85°C
  • Minimum Operating Temperature
    -40°C
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    10.0000 ppm/°C
  • Resistance
    11.8 kOhm
  • Power Rating
    0.1 W
  • Resistor Type
    High Precision/High Stability
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±3ppm
  • Pin Count

    a count of all of the component leads (or pins)

    2
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Series Resistance
    40Ω
  • Resistance Tolerance

    Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

    0.1
  • Product Length
    2 mm
  • Product Width
    1.25 mm
  • Width
    4.34mm
  • Height
    3.5mm
  • Length
    10.77mm
0 Similar Products Remaining