Euroquartz 16.384MHZ 49USMX/30/50/-40+85/18PF/ATF

Mounting Type

Through Hole

Housing Material

Thermoplastic

Package

Bulk

Base Product Number

VF16

Mfr

Amphenol Anytek

Torque-Screw

-

Current-UL

10 A

Product Status

Active

Contact Materials

Copper

Voltage-UL

300 V

Current-IEC

-

Dimensions

12.4 x 4.5 x 4.2mm

Standard Frequency

16.384MHz

Package Type

SMD

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Minimum Operating Temperature

-40°C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 115°C

Series

VF

Type

Header, Male Pins, Shrouded (4 Side)

Number of Positions

16

Color

Green

Pitch

0.200 (5.08mm)

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

-

Insulation Height

0.866 (22.00mm)

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

Pin Count

a count of all of the component leads (or pins)

2

Termination Style

Solder

Contact Tail Length

0.157 (4.00mm)

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Number of Levels

2

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30ppm

Contact Mating Finish

Tin

Wire Gauge or Range - AWG

-

Positions Per Level

8

Plug Wire Entry

-

Header Orientation

Vertical

Wire Gauge or Range - mm²

-

Wire Strip Length

-

Screw Size

-

Series Resistance

45Ω

Features

-

Width

4.5mm

Height

4.2mm

Length

12.4mm

Material Flammability Rating

UL94 V-0