Emerson 54191023

Mounting Type

Surface Mount

Package / Case

0804, Convex, Long Side Terminals

Number of Pins

8

Supplier Device Package

--

Body Material

Aluminium

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+60°C

Minimum Operating Temperature

-10°C

Mounting Styles

Manifold

Actuation Type

Pilot/Spring

Maximum Operating Pressure

12bar

Manufacturer Series

541

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RAVF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.079 L x 0.039 W (2.00mm x 1.00mm)

Tolerance

±1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Applications

Automotive AEC-Q200

Function

5/2

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

5/2

Number of Resistors

4

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

62.5mW

Resistor-Ratio-Drift

--

Resistance (Ohms)

39

Resistor Matching Ratio

The resistor matching is done for better resistor poly arrangement and spacing(it is process dependent ),but the sheilding is used to protect critical nets from crossing noisy signals.

--

Height Seated (Max)

0.020 (0.50mm)