EL7252CN

Electric Imp Inc. EL7252CN

Part No:

EL7252CN

Manufacturer:

Electric Imp Inc.

Package:

PDIP

ROHS:

AINNX NO:

11931224-EL7252CN

Description:

Products specifications
  • Mount
    Through Hole
  • Package / Case
    PDIP
  • Number of Pins
    8
  • Power Dissipation (Max)
    1.05W
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    25 ns
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • JESD-609 Code
    e0
  • Number of Terminations
    8
  • Terminal Finish
    Tin/Lead (Sn/Pb)
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85°C
  • Min Operating Temperature
    0°C
  • Terminal Position
    DUAL
  • Number of Functions
    2
  • Supply Voltage
    15V
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    15V
  • Temperature Grade

    Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

    INDUSTRIAL
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    16V
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    2.5mA
  • Current - Output
    2A
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    25 ns
  • Output Characteristics
    TOTEM-POLE
  • Rise Time

    In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

    20ns
  • Fall Time (Typ)
    20 ns
  • Input Characteristics
    SCHMITT TRIGGER
  • Interface IC Type
    NAND GATE BASED MOSFET DRIVER
  • Number of Drivers
    2
  • Output Peak Current Limit-Nom
    2A
  • High Side Driver
    NO
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Lead Free
    Contains Lead
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Electric Imp Inc. EL7252CN.