Diodes Incorporated PI3B3253QE

Factory Lead Time

18 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-SSOP (0.154, 3.90mm Width)

Number of Pins

16

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2008

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Type

Multiplexer/Demultiplexer

Voltage - Supply

3V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

3.3V

Terminal Pitch

The center distance from one pole to the next.

0.635mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

3253

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.3V

Circuit

2 x 4:1

Supply Voltage-Max (Vsup)

3.63V

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

5

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

500mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

120mA

Number of Bits

8

Throw Configuration

4PST

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

250 ps

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

3μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

5.2 ns

Family

CBTLV/3B

Logic Function

Demultiplexer, Multiplexer

Output Characteristics

3-STATE

Supply Type

Single

Output Polarity

TRUE

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-120mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

120mA

Voltage Supply Source

A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.

Single Supply

Independent Circuits

1

Number of Output Lines

2

Length

4.9mm

Width

3.9mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free