AP4310AMTR-AG1

Diodes Incorporated AP4310AMTR-AG1

Part No:

AP4310AMTR-AG1

Manufacturer:

Diodes Incorporated

Datasheet:

AP4310(A)

Package:

8-SOIC (0.154, 3.90mm Width)

ROHS:

AINNX NO:

7879358-AP4310AMTR-AG1

Description:

IC OP AMP GP 1MHZ 8SOIC

Products specifications
  • Factory Lead Time
    23 Weeks
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Tin
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Supplier Device Package
    8-SOIC
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~105°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Published
    2008
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    105°C
  • Min Operating Temperature
    -40°C
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    500mW
  • Number of Circuits
    2
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    36V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    3V
  • Operating Supply Current
    200μA
  • Current - Supply
    200μA
  • Slew Rate

    the maximum rate of output voltage change per unit time.

    0.5V/μs
  • Amplifier Type
    General Purpose
  • Common Mode Rejection Ratio
    70 dB
  • Current - Input Bias
    20nA
  • Voltage - Supply, Single/Dual (±)
    3V~36V
  • Output Current per Channel
    40mA
  • Input Offset Voltage (Vos)
    500μV
  • Gain Bandwidth Product

    The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

    1MHz
  • Voltage Gain
    100dB
  • Power Supply Rejection Ratio (PSRR)
    70dB
  • Voltage - Input Offset
    500μV
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Diodes Incorporated AP4310AMTR-AG1.