Diodes Incorporated AP2151WG-7

Factory Lead Time

18 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

10 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2009

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Resistance

95mOhm

Terminal Finish

Matte Tin (Sn)

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

AP2151

Pin Count

a count of all of the component leads (or pins)

5

Number of Outputs

1

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

500mA

Voltage

5.5V

Interface

On/Off

Current

500mA

Output Configuration

High Side

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

50 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

USB Switch

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5V

Ratio - Input:Output

1:1

Voltage - Load

2.7V~5.5V

Driver Number of Bits

1

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO

Output Peak Current Limit-Nom

0.6A

Rds On (Typ)

95m Ω

Max Junction Temperature (Tj)

150°C

Drain to Source Resistance

95mOhm

Built-in Protections

TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

85°C

Features

Status Flag

On-State Resistance

95mOhm

Height

1.4mm

Length

3.1mm

Width

1.7mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free