Diodes Incorporated 74LVC273AT20-13

Factory Lead Time

10 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

20-TSSOP (0.173, 4.40mm Width)

Number of Pins

20

Supplier Device Package

20-TSSOP

Weight

190.990737mg

Clock-Edge Trigger Type

Positive Edge

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

74LVC

Published

2014

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Type

D-Type

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Voltage - Supply

1.65V~3.6V

Frequency

230MHz

Function

Reset

Output Type

Non-Inverted

Polarity

Non-Inverting

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.65V

Clock Frequency

230MHz

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

7.3 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

10μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

4.1 ns

Current - Quiescent (Iq)

10μA

Number of Bits per Element

8

Max Propagation Delay @ V, Max CL

7.3ns @ 3.3V, 50pF

Trigger Type

Positive Edge

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

24mA

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

4pF

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

24mA

Number of Input Lines

8

Number of Output Lines

8

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant