CY62127BVLL-70BAI
-
32427880-CY62127BVLL-70BAI
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
An indicator of formal certification of qualifications.
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
A computer system has an address bus with 8 parallel lines. This means that the address bus width is 8 bits.
Word "size" refers to the amount of data a CPU's internal data registers can hold and process at one time.