CUI Inc CMC-9745-37T3

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Shape

Circular

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Lead Free Status / RoHS Status

--

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

1.5V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 60°C

Series

SXT214

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.079 L x 0.063 W (2.00mm x 1.60mm)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

--

Termination

Solder Pads

Type

MHz Crystal

Frequency

52 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

Output Type

Analog

ESR (Equivalent Series Resistance)

60 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

11pF

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

2 kOhms

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±50ppm

Current - Supply

400µA

Direction

Unidirectional

Voltage Range

1.5V ~ 9V

Frequency Range

A continuous range or spectrum of frequencies that extends from one limiting frequency to another.

100Hz ~ 12kHz

Sensitivity

-37dB ±3dB @ 94dB SPL

Port Location

Top

S/N Ratio

72dB

Height Seated (Max)

0.020 (0.50mm)

Height (Max)

0.185 (4.70mm)

Ratings

-