CTS Corporation 9904

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Weight

-

Mounting Hole Spacing

The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

2.380 (60.45mm)

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

120VAC

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 60°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Type

MHz Crystal

Frequency

14.31818 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

Termination Style

Wire Leads

Function

Gearmotor

Approval Agency

-

ESR (Equivalent Series Resistance)

120 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±15ppm

RPM

4 RPM

Encoder Type

An encoder is classified into four types: mechanical, optical, magnetic, and electromagnetic induction types.

-

Power - Rated

-

Torque - Rated (oz-in / mNm)

1440 / 10169

Motor Type

-

Torque - Max Momentary (oz-in / mNm)

-

Gear Reduction Ratio

The “reduction” or gear ratio is calculated by dividing the number of teeth on the large gear by the number of teeth on the small gear.

-

Features

-

Height Seated (Max)

0.026 (0.65mm)

Diameter - Shaft

0.375 (9.53mm)

Length - Shaft and Bearing

-

Ratings

-