CTS MP100

Mounting Type

Through Hole

Package / Case

Radial, Can - Snap-In - 3 Lead

Surface Mount Land Size

-

Lead Free Status / RoHS Status

Lead free / RoHS Compliant

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

400V

Lifetime @ Temp.

10000 Hrs @ 105°C

Standard Frequency

10 MHz

Supplier Package

HC-49/U

Mounting

Through Hole

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 70 C

Minimum Operating Temperature

- 20 C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C ~ 105°C

Series

059 PLL-SI

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Box (TB)

Size / Dimension

0.984 Dia (25.00mm)

Tolerance

±20%

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Applications

General Purpose

Capacitance

100µF

Frequency

10 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

50 PPM

Pin Count

a count of all of the component leads (or pins)

2

Termination Style

Radial

ESR (Equivalent Series Resistance)

2.02 Ohm @ 100Hz

Lead Spacing

the distance between two baselines of lines of type. The word 'leading' originates from the strips of lead hand-typesetters used to use to space out lines of text evenly. The word leading has stuck, but essentially it's a typographer's term for line spacing.

0.394 (10.00mm)

Polarization

Polar

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

Series

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

1.66 Ohms

Ripple Current @ Low Frequency

550mA @ 100Hz

Drive Level

100 uW

ESR

30 Ohms

Series Resistance

30 Ohm

Height Seated (Max)

1.654 (42.00mm)

Width

3.8 mm

Height

13.46 mm

Length

10.85 mm

Diameter

-

Ratings

-