CTS 416F500X2IAR

Package / Case

1.6 mm x 1.2 mm

Frequency Aging

±3 ppm/Year

Standard Frequency

50 MHz

Mode of Oscillation

Fundamental

Mounting

Surface Mount

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 85 C

Minimum Operating Temperature

- 40 C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40 to 85 °C

Tolerance

15 PPM

Type

Crystal

Frequency

50 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

20 ppm

Pin Count

a count of all of the component leads (or pins)

4

Termination Style

SMD/SMT

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10 pF

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±15 ppm

ESR

100 Ohms

Series Resistance

100 Ohm

Width

1.2 mm

Length

1.6 mm