CTS 416F40633AAT

Mounting Type

Free Hanging (In-Line)

Mounting Feature

a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

-

Shell Material

Thermoplastic

Voltage, Rating

1000VAC, 1500VDC

Package

Bulk

Primary Material

Plastic

Base Product Number

NLS-1

Mfr

ITT Cannon, LLC

Product Status

Active

Contact Finish Mating

Silver

Frequency Aging

±3 ppm/Year

Standard Frequency

40.61 MHz

Mode of Oscillation

Fundamental

Mounting

Surface Mount

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 125°C

Series

Powerlock

Termination

Crimp

Connector Type

Line Source, Male Pins

Type

Crystal

Number of Positions

1

Color

-

Fastening Type

There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.

Bayonet Lock

Current Rating (Amps)

660A

Orientation

Keyed

Shielding

-

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP67 - Dust Tight, Waterproof

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

30 ppm

Shell Finish

-

Pin Count

a count of all of the component leads (or pins)

4

Shell Size - Insert

-

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10 pF

Shell Size, MIL

-

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30 ppm

Features

-

Contact Finish Thickness - Mating

-