CTS 416F40033IKT

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Number of Terminals

14

Operating Temp Range

-55C to 125C

Termination Method

Crimp

Contact Materials

Copper Alloy

Rad Hardened

No

Contact Classification

14Signal

Shell Size / Insert Arrangement

22-19

Voltage, Rating

700VDC/500VAC

Frequency Aging

±3 ppm/Year

Standard Frequency

40 MHz

Mode of Oscillation

Fundamental

Mounting

Surface Mount

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40 to 85 °C

Type

Circular

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

30 ppm

Pin Count

a count of all of the component leads (or pins)

4

Number of Contacts

14(POS)

Contact Gender

SKT

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8 pF

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

1(Port)

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30 ppm

Family

ACC

Series Resistance

100 Ohm

Shell Plating

the outer-most structure on the hull of a steel or aluminum ship or boat.

Cadmium

Strain Relief

No