CTS 416F32035AAT

Package / Case

0603 (1608 Metric)

Supplier Device Package

0603

Package

Tape & Reel (TR)

Base Product Number

RS73F1JRT

Mfr

KOA Speer Electronics, Inc.

Product Status

Active

Mounting

Surface Mount

Mode of Oscillation

Fundamental

Standard Frequency

32 MHz

Frequency Aging

±3 ppm/Year

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RS73-RT

Size / Dimension

0.063 L x 0.031 W (1.60mm x 0.80mm)

Tolerance

±0.1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±25ppm/°C

Type

Crystal

Resistance

1.37 kOhms

Composition

Thick Film

Power (Watts)

0.2W, 1/5W

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

0 ppm

Pin Count

a count of all of the component leads (or pins)

4

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10 pF

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30 ppm

Series Resistance

200 Ohm

Features

Automotive AEC-Q200

Height Seated (Max)

0.022 (0.55mm)

Ratings

AEC-Q200