82924027

Crouzet 82924027

Part No:

82924027

Manufacturer:

Crouzet

Datasheet:

-

Package:

-

ROHS:

AINNX NO:

5654067-82924027

Description:

STEPPER MOTOR PM GEARED UNI 6.3V

Products specifications
  • Factory Lead Time
    13 Weeks
  • Weight
    0.463lb 210.01g
  • Mounting Hole Spacing

    The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

    1.874 (47.60mm)
  • CoilResistance
    10.7Ohm
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    6.3VDC
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30°C~70°C
  • Series
    82924
  • Published
    2016
  • Size / Dimension
    Round - 2.020Dia 51.30mm
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Type
    Permanent Magnet Gear Motor
  • Resistance
    10.7Ohm
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    590mA
  • Termination Style
    Wire Leads
  • Inductance
    24 mH
  • Accuracy
    ±5%
  • Coil Type

    There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

    Unipolar
  • Step Angle

    the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

    7.5°
  • Steps per Revolution
    48
  • Torque - Holding (oz-in / mNm)
    9.91 / 70
  • Features
    Flatted Shaft
  • NEMA Frame Size

    NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

    21
  • Rotor Inertia
    18.8gcm2
  • Diameter - Shaft
    0.157 (4.00mm)
  • Length - Shaft and Bearing
    0.520 13.20mm
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
0 Similar Products Remaining