Cree Inc. LMD300-0040-C900-7030000

Factory Lead Time

4 Weeks

Mount

Chassis Mount, Screw

Mounting Type

Chassis Mount

Weight

0.43lb 195.04g

Voltage-Output 1

40V

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

305V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C

Series

LMD300

Size / Dimension

3.54Lx3.54W x 1.48 H 90.0mmx90.0mmx37.5mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Wire Leads

Type

Constant Current

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

36W

Termination Style

Wire Leads

Number of Outputs

1

Approval Agency

CE, CQC, cULus

Efficiency

86%

Voltage - Input (Max)

305VAC

Max Output Current

The maximum current that can be supplied to the load.

900mA

Voltage - Input (Min)

108VAC

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

277V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

900mA

Output Power

That power available at a specified output of a device under specified conditions of operation.

40W

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

40V

Topology

AC DC Converter

Current - Output 1

900mA

Max Output Power

The maximum output power = the maximum output current × the rated output voltage

36W

Dimming

Analog

Height

37.592mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Ratings

IP20, NEMA 410