2811-12-0

Coto Technology 2811-12-0

Part No:

2811-12-0

Manufacturer:

Coto Technology

Datasheet:

-

Package:

-

AINNX NO:

44513778-2811-12-0

Description:

Hermetically sealed DPDT (2formC) reed relay. 12VDC Coil. 600 ohm coil resistance. Electrostatic and magnetic shielding.

Products specifications
  • Mount
    Surface Mount
  • Number of Pins
    4
  • RoHS
    Compliant
  • Watchdog Timers
    No
  • Type
    Simple Reset/Power-On Reset, Voltage Detector
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85 °C
  • Min Operating Temperature
    -40 °C
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    1 W
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    10 V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    950 mV
  • Operating Supply Current
    800 nA
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    800 nA
  • Accuracy
    2 %
  • Reset
    Active Low
  • Number of Voltages Monitored

    Voltage monitoring relays can detect not only under-voltages and over-voltages, but also voltage-related issues such as phase imbalances, phase loss, and phase sequence. Voltage monitoring relays are designed for either single-phase or three-phase systems.

    1
  • Min Reset Threshold Voltage
    1.666 V
  • Max Reset Threshold Voltage
    1.734 V
  • Threshold Voltage
    1.7 V
  • Undervoltage Threshold

    During power up and power down, the UVLO function of the device has at least 0.1 V of hysteresis, but not more than 0.3 V. The UVLO function in power devices is a useful feature that enables robust system behavior across a wide range of operating conditions.

    1.7 V
  • Number of Monitored Inputs
    1
0 Similar Products Remaining