Comus International PSA240/30

Package / Case

1210 (3225 Metric)

Supplier Device Package

1210

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Base Product Number

RN73H2E

Mfr

KOA Speer Electronics, Inc.

Product Status

Active

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RN73H

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Tolerance

±0.05%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±10ppm/°C

Resistance

82.5 kOhms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-20 °C

Composition

Metal Film

Power (Watts)

0.25W, 1/4W

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500 mA

Throw Configuration

SPST

Contact Current Rating

The current rating of a contact is defined as the current level that creates a certain temperature rise of the contact spring — usually 20°C or 30°C. Both electrical and thermal factors govern the heat created by the current.

500 mA

Switching Voltage

The maximum switching voltage of a relay is the maximum voltage that can be across the contacts whether the relay is open or closed. Operating a relay with high voltages present can cause arcing, and this in turn erodes the contacts and eventually degrades contact performance.

400 V

Features

Automotive AEC-Q200, Moisture Resistant

Supply Current

Supply current refers to the input current to an LDO regulator at no load, which flows inside the IC in order to operate. The power consumption of an LDO regulator can be calculated as. (Input Voltage) x (Consumption current of IC itself) + (Input Voltage - Output Voltage) x (Load current)

500mA

Height Seated (Max)

0.028 (0.70mm)

REACH SVHC

No SVHC

Ratings

AEC-Q200