Citizen Finedevice Co Ltd CM250C100000AZFT

Factory Lead Time

15 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-SOJ, 5.50mm pitch

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

CM250C

Published

2012

Size / Dimension

0.315Lx0.150W 8.00mmx3.80mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Type

kHz Crystal (Tuning Fork)

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

TAPE AND REEL

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.60.00.20

Reach Compliance Code

not_compliant

Frequency

100kHz

Physical Dimension

L7.9XB3.7XH2.4 (mm)/L0.311XB0.146XH0.094 (inch)

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

0.1MHz

ESR (Equivalent Series Resistance)

50kOhm

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

12.5pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30ppm

Drive Level

1 μW

Height Seated (Max)

0.100 2.55mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free