10-HM-01128-02

Cinch Connectivity Solutions 10-HM-01128-02

Part No:

10-HM-01128-02

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35935253-10-HM-01128-02

Description:

HDMI Cables HDMI MALE - MALE 2 M CABLE

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Connector End A Pin Count
    19 Position
  • Connector End B
    HDMI
  • Connector End A
    HDMI
  • Part # Aliases
    30-1611-2
  • Manufacturer
    Cinch Connectivity Solutions
  • Brand
    AIM-Cambridge / Cinch Connectivity Solutions
  • Connector End B Pin Count
    19 Position
  • RoHS
    Details
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 70°C
  • Series
    SXT114
  • Size / Dimension
    0.063 L x 0.047 W (1.60mm x 1.20mm)
  • Type
    MHz Crystal
  • Subcategory
    Cable Assemblies
  • Frequency
    48 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±30ppm
  • ESR (Equivalent Series Resistance)
    100 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    8pF
  • Cable Length

    A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

    2 m
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20ppm
  • Jacket Color
    Black
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    HDMI Cables
  • Product Category

    a particular group of related products.

    HDMI Cables
  • Height Seated (Max)
    0.018 (0.45mm)
0 Similar Products Remaining