105-1740-3

Cinch Connectivity Solutions 105-1740-3

Part No:

105-1740-3

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35935234-105-1740-3

Description:

RF Adapters - Between Series TROMPETER COAX CONNECTOR

Products specifications
  • Package / Case
    4-SMD, No Lead
  • Mounting Type
    Surface Mount
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Nickel
  • Package
    Bulk
  • Product Status
    Active
  • Mfr
    Suntsu Electronics, Inc.
  • Unit Weight
    0.806010 oz
  • Factory Pack QuantityFactory Pack Quantity
    1
  • Manufacturer
    Cinch Connectivity Solutions
  • Brand
    Trompeter / Cinch Connectivity Solutions
  • RoHS
    Details
  • Series
    SXT324
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 60°C
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Type
    MHz Crystal
  • Subcategory
    RF Adapters
  • Frequency
    14.7456 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • ESR (Equivalent Series Resistance)
    100 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    17pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20ppm
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    RF Adapters - Between Series
  • Product Category

    a particular group of related products.

    RF Adapters - Between Series
  • Height Seated (Max)
    0.031 (0.80mm)
  • Ratings
    -
0 Similar Products Remaining