VP02EP

Carlo Gavazzi Inc. VP02EP

Part No:

VP02EP

Manufacturer:

Carlo Gavazzi Inc.

Package:

-

ROHS:

AINNX NO:

2980824-VP02EP

Description:

CARLO GAVAZZI VP02EP LIQUID LEVEL SENSOR

Products specifications
  • Factory Lead Time
    7 Weeks
  • Mounting Type
    Threaded
  • Housing Material
    Polysulphone
  • Material - Housing & Prism
    Polysulfone (PES)
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    10V~40V
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C~80°C
  • Published
    1998
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    Not Applicable
  • Connector Type
    Cable
  • Type
    Liquid
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    200mA
  • Frequency
    30Hz
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    40V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    10V
  • Output Configuration
    PNP
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    200mA
  • Max Supply Voltage (DC)
    40V
  • Min Supply Voltage (DC)
    10V
  • Switch Actuation Level
    0.098 (2.5mm), 0.197 (5mm)
  • Diameter
    12.5mm
  • Length
    92mm
  • REACH SVHC
    No SVHC
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Ratings
    IP67
0 Similar Products Remaining