Canon MDVB1-9SH025L

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Number of Pins

9

RoHS

Non-Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 70°C

Series

CX3225GB, Kyocera

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued at Digi-Key

Termination

Crimp

Connector Type

D-Sub

Type

MHz Crystal

Gender

Female

Frequency

30MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

ESR (Equivalent Series Resistance)

50 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

8pF

Wire/Cable Type

Coaxial

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

254 mm

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Height Seated (Max)

0.035 (0.90mm)

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Ratings

--