Burr Brown OPA541AP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

11

Operating Temperature (Max.)

85°C

Operating Temperature (Min.)

-25°C

Published

2013

JESD-609 Code

e0

Number of Terminations

11

Terminal Finish

Tin/Lead (Sn/Pb)

Terminal Position

ZIG-ZAG

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

THROUGH-HOLE

Number of Functions

1

Supply Voltage

35V

Terminal Pitch

The center distance from one pole to the next.

1.7mm

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

+-35V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

OTHER

Supply Current-Max

25mA

Slew Rate

the maximum rate of output voltage change per unit time.

6 V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

113 dB

Neg Supply Voltage-Nom (Vsup)

-35V

Unity Gain BW-Nom

1600 kHz

Average Bias Current-Max (IIB)

0.00005μA

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Supply Voltage Limit-Max

40V

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

NO

Bias Current-Max (IIB) @25C

0.00005μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Neg Supply Voltage-Max (Vsup)

-40V

Input Offset Voltage-Max

10000μV

Wideband

NO

Power

YES

Voltage Gain-Min

31622.8

Common-mode Reject Ratio-Min

95 dB

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant