BCM54210EB1IMLGT

Broadcom BCM54210EB1IMLGT

Part No:

BCM54210EB1IMLGT

Manufacturer:

Broadcom

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39756153-BCM54210EB1IMLGT

Description:

B1 PRODUCTION REV, RGMII TO CU G

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Factory Pack QuantityFactory Pack Quantity
    12500
  • Manufacturer
    Broadcom Limited
  • Brand
    Broadcom / Avago
  • RoHS
    Details
  • Base Product Number
    BCM54210
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C ~ 70°C
  • Series
    SXT324
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Type
    MHz Crystal
  • Subcategory
    Communication & Networking ICs
  • Frequency
    24.576 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • ESR (Equivalent Series Resistance)
    50 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    12pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±15ppm
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    Ethernet ICs
  • Product
    Ethernet PHYs
  • Product Category

    a particular group of related products.

    Ethernet ICs
  • Height Seated (Max)
    0.031 (0.80mm)
0 Similar Products Remaining