Bourns Inc. 3046L-2-502

Factory Lead Time

11 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Mount

Chassis Mount

Mounting Type

Chassis Mount

Package / Case

Module, Wire Leads, Threaded

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Published

2004

Tolerance

20%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Lead Wire

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

1000 ppm/°C

Resistance

5kOhm

Composition

Potentiometer

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8533.40.80.70

Power Rating

125mW

Depth

5.69mm

Construction

Sealed

Base Part Number

3046L

Military Standard

Not

Termination Style

Wire Leads

Rated Power Dissipation (P)

0.125W

Actuator Type

Round Shaft

Size Code

7726

Taper

Linear

Linearity

±5%

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

±20%

For Measuring

Linear Position

Linear Range

The range of concentrations where the signals are directly proportional to the concentration of the analyte in the sample.

0 ~ 6.35mm (0 ~ 0.25)

Length

40.41mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant