BEI Sensors 01075-111

Package / Case

4-SMD, No Lead

Mounting Type

Surface Mount

Product Status

Active

Mfr

Suntsu Electronics, Inc.

Package

Bulk

Manufacturer Part Number

01075-111

Approvals

CE;UL;cULus

Shaft Type

Thru

Manufacturer

BEI Sensors

Brand

BEI Sensors

Number of Detents

No Detent

RoHS

Details

With Switch

Without Switch

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 70 C

Unit Weight

1.126 lbs

Minimum Operating Temperature

0 C

Factory Pack QuantityFactory Pack Quantity

1

Mounting Styles

Servo Mount

Series

SXT324

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Type

MHz Crystal

Subcategory

Encoders

Technology

Rotary

Frequency

14.7456 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±20ppm

Termination Style

Connector

Output Type

Quadrature

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5 VDC to 28 VDC

ESR (Equivalent Series Resistance)

100 Ohms

Number of Channels

2 Channel

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

20pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Resolution

1024 PPR

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Encoders

Product

Optical Encoders

Product Category

a particular group of related products.

Encoders

Shaft Diameter

-

Bearings

Yes

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP65

Height Seated (Max)

0.031 (0.80mm)

Ratings

-